Product ID:THERMOFIT HEAT-SHRINKABLE POLYMERIC PRODUCT
MSDS Date:04/01/1991
FSC:5970
NIIN:01-181-0134
MSDS Number: BRHBR

RAYCHEM CORP

300 CONSTITUTION DRIVE
MENLO PARK, CA 94025-1111
US

Emergency Phone: 415-361-4907 (24 HRS)

Info Phone: 415-361-3485

Preparer: DONNA SEID

Cage: 06090

RAYCHEM CORP

MENLO PARK, CA 94025-1164 US

Telephone: 415-361-4907

Cage: 06090

THE FOLLOWING INGREDIENTS ARE LISTED BY THE MFR. EACH ONE

RTECS: 9999999ZZ

POLYETHYLENE

POLYOLEFIN

FLUOROPOLYMERS

CHLOROPOLYMERS

POLYAMIDE

POLYESTER

SILICONE

LD50 LC50 Mixture:NO INFORMATION GIVEN ON MSDS BY MFR.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HEAT SHRINKABLE POLYMERIC PRODUCTS ARE
NOT HAZARDOUS DURING PROPER INSTALLATION, BUT MAY EMIT HAZARDOUS
BYPRODUCTS IF OVERHEATED TO DEGRADATION. OVERHEATING TO CHARRING
AND/OR BURNING WILL PRODUCE FUM ES THAT MAY CAUSE EYE, SKIN, NOSE
AND/OR THROAT IRRITATION. CONTACT W/HOT SURFACES MAY CAUSE THERMAL
BURNS.
Explanation of Carcinogenicity:THE PRODUCT CONTAINS NO INGREDIENT AT
0.1% OR GREATER THAT IS LISTED BY IARC, NTP OR OSHA AS A
CARCINOGEN.
Effects of Overexposure:EYE, SKIN, NOSE AND/OR THROAT IRRITATION.
Medical Cond Aggravated by Exposure:NO INFORMATION GIVEN ON MSDS BY
MFR.

First Aid:IF IRRITATION PERSISTS OR IS SEVERE, SEE A DOCTOR. EYE:FLUSH
W/WATER 15 MIN. GET MEDICAL ATTENTION. SKIN:IF MOLTON ADHESIVE OR
POLYMER CONTACTS SKIN, DO NOT REMOVE. TREAT AS A BURN & GET MEDICAL
ATTEN TION. INHALATION:REMOVE TO FRESH AIR. GET MEDICAL AID IF
BREATHING PROBLEMS DEVELOP. INGESTED:NOT A NORMAL ROUTE OF
EXPOSURE. IF SWALLOWED, SEE A DOCTOR.

Extinguishing Media:CARBON DIOXIDE, WATER, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT IN ENCLOSED AREAS.
Unusual Fire/Explosion Hazard:TOXIC FUMES/GASES MAY EVOLVE IN A FIRE.

Spill Release Procedures:WHEN COOL, PICK UP FOR REUSE.
Neutralizing Agent:NONE

Handling and Storage Precautions:NO SPECIAL STORAGE IS REQUIRED. FOLLOW
RAYCHEM INSTALLATION INSTRUCTIONS AND APPLICATION GUIDES TO INSURE
INSTALLATION IS DONE PROPERLY AND SAFELY.
Other Precautions:DO NOT TOUCH HOT SURFACES. IF PRODUCTS CHAR OR BURN,
IMMEDIATELY STOP HEATING. AVOID INHALING ANY FUMES EVOLVED FROM
CHARRED/ BURNED PRODUCT. VENTILATE AREA BEFORE RESUMING
INSTALLATION.

Respiratory Protection:NONE NORMALLY REQUIRED. USE NIOSH APPROVED
SELF-CONTAINED BREATHING APPARATUS IF TLV IS EXCEEDED DURING
HEATING OR BURNING.
Ventilation:GENERAL
Protective Gloves:USE HEAT RESISTANT GLOVES.
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NO INFORMATION GIVEN ON MSDS BY MFR.
Work Hygienic Practices:USE GOOD INDUSTRIAL HYGIENE PRACTICE. AVOID
UNNECESSARY CONTACT. WASH THOROUGHLY BEFORE EATING OR DRINKING.
Supplemental Safety and Health
KEY2:KT

HCC:N1
NRC/State Lic Num:NONE
Solubility in Water:INSOLUBLE
Appearance and Odor:PLASTIC TUBING & MOLDED PARTS IN A VARIETY OF
SHAPES, SIZES AND COLORS, NO ODOR

Stability Indicator/Materials to Avoid:YES
NO INFORMATION GIVEN ON MSDS BY MFR.
Stability Condition to Avoid:AVOID OVER HEATING THE PRODUCT.
Hazardous Decomposition Products:MAY INCLUDE: CO, CO2, ALDEHYDES,
ACETIC ACID, SIO2, HCL, HF, HBR, NOX, POX, SOX, FLUORO-OLEFINS, LOW
MOL WT HYDROCARBONS
Conditions to Avoid Polymerization:WILL NOT OCCUR

Waste Disposal Methods:NON-HAZARDOUS PRODUCTS MAY BE BURIED OR
INCINERATED I/A/W FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.